Acrylic white joint filler
Acrylic coloured joint filler excellent level external and internal use, intended fillers (fugues) between ceramic tiles, mosaics, natural marble, natural stone and porcelain from 3 mm to 10 mm, a standard CG-2.
Package : Bag of 1 kg.
Storage : in cool and dry place
Shelf life :12 months
Main uses: Filling gaps between the ceramic tiles of any kind kitchens, showers, bathrooms, or anywhere else. Fill spaces between tiles Mosaic and glass facades to buildings as an outer covering and floors, narrow uses between 2-10 mm.
Benefits: Readily cleaned the tiles after drying, ready for immediate use, no cracks, standing for many years. According rifle with a knowledge of Italian and Fitness excellent workability, good resistance to water, steam allows passage contains acrylic materials.
Substrate Preparation: With adhesive wall tiles minute of wait 24 hours after gluing performed tiles, clean the joints from dirt dust, residue, etc.. Advisable to rinse and clean with a cloth before application.
Preparation of the mixture : Mix 2.5-3 parts of acrylic gun with 1 part water until the mixture is thick and uniform liquid with no lumps, about 300 cc of water per 1 kg of powder, wait about 5 minutes and mix again and then you can work.
Application instructions: Please fill in the margins mostly acrylic using a spatula (small rubber squeegee) in a diagonal direction, margins, wait about 20-30 minutes to harden the material and clean the gun residue with a sponge or cloth, careful not remove the gun from the slots, you may want to wet after 24 hours of application gun.
Other notes: Application will be made only after the rifle complete drying of the adhesive tiles, no working temperature high of 35 degrees Celsius and a low of 5 ° C, rinse control only after 24 hours Be sure the amount of water in the mixture as directed.
